Greg Myers Construction logo
Side of a new barndominium with a dormer window and metal roof

Metal Roofing · Kent, WA

Metal Roofing Contractor in Kent, WA

Metal Roofing in Kent. Work directly with Greg — call, text or get a free estimate.

Kent, King County and every town within 100 miles of Rainier

Swipe for more reviews →

Get a Free Metal Roof Estimate in Kent

Free estimates. Fill out the form or call, and Greg will get right back to you.

  • Free estimates
  • Licensed, bonded & insured
  • 33 years of experience
  • Work directly with Greg

Fill out the form below to get your free estimate 👇

Rather talk? Call or text Greg: (360) 239-9840

Metal Roofing · Kent

Metal Roofing in Kent

For metal roofs on homes, barns, shops and pole buildings in Kent, you deal with Greg directly — no salesman, no middleman. He's based in Rainier, about 43 miles away, with 33 years of experience.

In the older neighborhoods here, a lot of the work is remodels, additions, ADUs and decks on tight lots, built to the city's permit and inspection schedule. Bad flashing, missed condensation control and loose fasteners are what make a metal roof leak, not the metal itself.

One customer called Greg “a man of integrity.” Another wrote that he “does excellent work.”

Barndominium garage wing with two bays, board-and-batten siding and a metal roof
Our crew's work

What's included

Metal Roofing we do in Kent

  • 01

    Standing seam roofs

    Concealed-fastener panels with raised seams, the clean look most people want on a house. With no exposed screws, there are fewer places for water to work its way in over the years.

  • 02

    Exposed-fastener panel roofs

    Ribbed panels fastened through the face, a practical choice for barns, shops, pole buildings and lean-tos.

  • 03

    Tear-off and deck repair

    We strip the old roof down to the sheathing, haul it away, and replace any boards that have gone soft from trapped moisture.

  • 04

    Underlayment and condensation control

    The right underlayment on a house, and a condensation barrier on an open barn or shop, so the roof doesn't drip on the inside on cold mornings.

  • 05

    Flashing, trim and penetrations

    Ridge caps, eave and rake trim, valley flashing, and boots around vents and chimneys, detailed so water runs off the roof instead of under it.

  • 06

    Metal roofs on new buildings

    On the barndominiums, pole barns, garages and porches Greg builds, the metal roof goes on as part of the same job, so one builder answers for the whole structure.

King County, WA

Metal Roofing around Kent

Greg works all over Kent — near Triangle Park, Russell Road Park and Clark Lake — and throughout King County.

Kent spreads from the Green River valley floor up onto the East Hill and West Hill plateaus in south King County. Kent is about 43 miles northeast of our base in Rainier, well inside our 100-mile service area.

Western Washington buildings fight water more than anything — months of rain, moss on the roof, rot wherever wood stays wet, and soils that hold moisture. A building lasts when it sits on a proper foundation with drainage around it, is wrapped and flashed right, and is built to dry out.

Ideas for your project

Metal Roofing: what it can look like

  • Red two-story barn-style house with a gray standing-seam metal roof, surrounded by trees
  • Red gambrel barn with a silver metal roof under an overcast sky
  • Long red barn with a metal roof behind a white board fence
  • Close view of a dark standing-seam metal roof with a brick chimney

How it works

How your Kent metal roof job works

  1. 1

    Free on-site estimate

    Greg looks over the roof, checks the decking and attic or truss space for moisture, and talks through panel style and color with you.

  2. 2

    Written scope and materials

    You get a scope that spells out panel type, trim and underlayment, then materials are ordered and the tear-off is scheduled for a dry stretch.

  3. 3

    Tear-off and install

    The old roofing comes off in sections so the house isn't left open to the weather, then underlayment, panels and flashing go on.

  4. 4

    Cleanup and final walk

    We sweep the yard and driveway with a magnet for screws and scraps, then walk the finished roof with you.

Customer reviews

What customers say about Greg

  • “He is a quality person to deal with and does excellent work. I would recommend him to anyone.”

    Don B.

    An addition to an existing structure · HomeAdvisor review

  • “He is a man of integrity. He does what he says and says what a does.”

    Tom W.

    A project with Greg · HomeAdvisor review

  • “He does good work.”

    Bill

    A project with Greg · HomeAdvisor review

Questions

Metal Roofing in Kent: FAQs

Do you do metal roofing in Kent, WA?

Yes. Kent is about 43 miles northeast of our base in Rainier, well inside our 100-mile service area. Greg handles metal roofs on homes, barns, shops and pole buildings there, and the estimate is free.

Do I need a permit for metal roofing in Kent?

It depends on the project. When one is needed, Greg pulls the permit from the City of Kent's building department and builds to whatever the permit and inspection require.

How much does a metal roof cost?

It depends on the size and pitch of the roof, standing seam versus exposed-fastener panels, how many chimneys, skylights and valleys need flashing, and whether the old roof has to come off and the decking be replaced. Greg gives free on-site estimates, so you get a real number for your roof instead of a guess.

Is a metal roof loud when it rains?

On a house, not usually. Over solid sheathing and underlayment, rain sounds close to what you hear with shingles. On an open barn or shop with no ceiling you will hear it more, and insulation or a liner under the panels quiets it down.

Can you put a metal roof on my barn or shop as well as my house?

Yes. Greg roofs homes, barns, pole buildings, garages, shops and porches, and can match panel colors so the buildings on your property look like they belong together.

Do you repair existing metal roofs?

Yes. Most metal roof leaks come from worn screw washers, loose trim or flashing that was done wrong, and those can usually be fixed without replacing the panels. If the panels themselves are rusted through, Greg will tell you straight and quote a replacement.

More in Kent

Other services in Kent

Ready to start your Kent metal roof project?

Free estimates. Call, text or fill out the form.